Code EK000420
Karl Mayer Filsize SF 1800
KARL MAYER
SIZING TEXTILE MACHINE
KARL MAYER offers innovative textile sizing machine for the processing of spun yarns as well as single-end and full-end sizing machinery and assembling units for filament yarns. This second-hand FILSIZE SF 1800 sizing machine allow high productions with a range up designed to 500 m/min and a working width of 1.800 mm.
Manufacturer
Karl Mayer
Year of construction
2018
Model
Filsize SF 1800
Working width
1.800 mm
Raw material
Yarns
Condition
Second-hand sizing machine
Technical Data | |||
|---|---|---|---|
REFERENCE MACHINE | FILSIZE SF 1800 | ||
TYPE | SINGLE-END SIZING (ROTAL TYPE) | ||
WORKING WIDTH | 1.800 mm | ||
DIAMETER MIN/MAX | 300 mm / 1.040 mm | ||
SIZING BATH TYPE | MPF FOR FILAMENT | ||
DRYER TYPE | CD-F-7- WITH 7 DRY CYLINDERS ALL TEFLON COATED | ||
BEAMING TYPE | BD | ||
SPEED | 500 m/min | ||
Sizing Textile Machines
The sizing process consists of impregnating with the size the warp unwound from the warping beams, drying, separating the ends and beaming. During the sizing process, the warp is marked for dividing it into pieces of predetermined length.
The main parts of a sizing machine are:
The creel for the accommodation of the warping beams
The framework and drive
The sizing unit consisting of a size box and immersion and squeezing rollers
The drying section where the excess moisture is removed from the size and pressed warp ends
The headstock
Upon the arrangement of the drying section, all sizing machines may be classified as follows:
- Cylinder sizing machine in which the warp is dried by contact with the hot surface of the cylinder;
- Hot air sizing machine in which drying is effected in chambers with hot air;
- Combined sizing machine in which the warp is dried by contact with the hot surface of the cylinders and bypassing through hot air chambers;
- Special sizing machine in which the warp is dried by electric heating, high-frequency currents, or by infra-red rays.
Related used machinery
TMT WR 1000 Queen 2.350 mm
TMT
SIZING TEXTILE MACHINE
TMT WR 1000 Queen was designed for the most delicate fibers such as wool or filaments, works with sectional beams and tested with direct winder, the beam-to-beam system can work bi-directionally. The exclusive new vertical sizing module uses tangential applicators and two leveling/impregnating cylinders, an infrared oven and drying cylinders. This second-hand WR 1000 Queen Sizing Machine allow high productions with a range up to 50 meters and a working width of 2.350 mm.
Custom prototype for related products
2.200 mm Monforts Montex 8F-V
MONFORTS
STENTER FINISHING TEXTILE MACHINES
The Montex stenter finishing machine is considered a perfect solution for the treatment of woven and knitted fabrics offering the latest technology for the optimum customer benefits. Intuitive touchscreen operation or intelligent monitoring systems and app-based service dialogue tools are just a few of the examples of the ongoing innovations from Monforts. The fully integrated and modularly expandable MonforClean exhaust air treatment system offers a unique combination of effective, complete exhaust air treatment and minimum space requirements.
Custom prototype for related products
Karl Mayer Ergotec M 2200 Warper
KARL MAYER
SECTIONAL WARPING TEXTILE MACHINE
This Ergotec M 2200 sectional used warper allow high productions with a range up designed to 1.000 m/min and a working width of 2.200 mm.
Karl Mayer automatic sectional warpers offer high sophisticated applications guaranting an outstanding warp quality due to the perfectly uniform yarn tension and the high remaining elongation. Highest productivity is achieved by combining minimum yarn load and high speeds.
Custom prototype for related products
Optimax-i-8-R 220 cm Picanol Looms
PICANOL
WEAVING MACHINE
This Optimax-i-8-R 220 cm used weaving machine produced by Picanol guarantee maximum performance minimizing the energy consumption. The performance of the loom focuses on maximum quality and versatility, guaranteed by the robust structure of the machine combined with the proven wheelbase geometry and the most suitable gripper system for any application.
Custom prototype for related products
