Code EK000459
Benninger Ben-tronic 3000 Warper
BENNINGER
WARPING SECTIONAL TEXTILE MACHINE
This used Ben-tronic 3000 sectional warper allow high productions with a range up designed to 1.300 m/min and a working width of 3.000 mm. The customers operating in the high-fashion textile industry such as for the production of fabrics for suits, shirts and upholstery, appreciate the advantages of Benninger automatic sectional warping machinery.
Manufacturer
Benninger
Year of construction
2004
Model
Ben-tronic 3000
Working width
3.000 mm
Raw material
Textile
Condition
Used warping machinery
Technical Data | |||
|---|---|---|---|
REFERENCE MACHINE | BENTRONIC 3000 | ||
TYPE | AUTOMATIC SECTIONAL WARPER | ||
WORKING WIDTH | 3.000 mm | ||
MAX WARPING SPEED | 1.300 m/min | ||
CREEL BOBBIN | 616 | ||
Textile Warping Machines
Sectional warping is one of the important processes of textile weaving where equal length of yarn is wound first in small sheets or sections on a drum and then transferred to the beam from the drum in the form of a sheet.
These machines make it possible to create warp of high quality and precision, ensuring reliability, high productivity and greater uniformity of textile products.
Sectional warping machinery are used in the textile industry for warp preparation, a key step in creating the fabric.
Each section is wound independently, allowing greater precision and control over thread tension. Next, the sections are joined into a single warp that is transferred to the loom for weaving.
Sectional warping machine are used to produce warps for a variety of fabric types, from apparel and furnishings to technical and composite fabrics.
Related used machinery
Karl Mayer Ergotec M 2200 Warper
KARL MAYER
SECTIONAL WARPING TEXTILE MACHINE
This Ergotec M 2200 sectional used warper allow high productions with a range up designed to 1.000 m/min and a working width of 2.200 mm.
Karl Mayer automatic sectional warpers offer high sophisticated applications guaranting an outstanding warp quality due to the perfectly uniform yarn tension and the high remaining elongation. Highest productivity is achieved by combining minimum yarn load and high speeds.
Custom prototype for related products
1.800 mm Biella Shrunk Process NANOMIX
BIELLA SHRUNK PROCESS
FINISHING STEAMING
TEXTILE MACHINE
NANOMIX is a compact low consumption finishing machine produced by Biella Shrunk Process whose process principle is essentially based on steam, water and air which are mixed inside a newly designed vaporization tunnel. This finishing steaming second-hand machine assures an optimal fabric relaxing with high shrinkage results to grant an ideal dimensional stability. Besides with the "Hot & Humid" system, the treated fabric shows a moisture regain increase instead of the typical over-drying, which takes place in traditional finishing machinery.
Custom prototype for related products
TMT WR 1000 Queen 2.350 mm
TMT
SIZING TEXTILE MACHINE
TMT WR 1000 Queen was designed for the most delicate fibers such as wool or filaments, works with sectional beams and tested with direct winder, the beam-to-beam system can work bi-directionally. The exclusive new vertical sizing module uses tangential applicators and two leveling/impregnating cylinders, an infrared oven and drying cylinders. This second-hand WR 1000 Queen Sizing Machine allow high productions with a range up to 50 meters and a working width of 2.350 mm.
Custom prototype for related products
Optimax-i-8-R 220 cm Picanol Looms
PICANOL
WEAVING MACHINE
This Optimax-i-8-R 220 cm used weaving machine produced by Picanol guarantee maximum performance minimizing the energy consumption. The performance of the loom focuses on maximum quality and versatility, guaranteed by the robust structure of the machine combined with the proven wheelbase geometry and the most suitable gripper system for any application.
Custom prototype for related products
