Code EK000402
2.200 mm Monforts Montex 8F-V
MONFORTS
STENTER FINISHING TEXTILE MACHINES
The Montex stenter finishing machine is considered a perfect solution for the treatment of woven and knitted fabrics offering the latest technology for the optimum customer benefits. Intuitive touchscreen operation or intelligent monitoring systems and app-based service dialogue tools are just a few of the examples of the ongoing innovations from Monforts.
The fully integrated and modularly expandable MonforClean exhaust air treatment system offers a unique combination of effective, complete exhaust air treatment and minimum space requirements.
Manufacturer
Monforts
Year of construction
2007
Model
MONTEX 8F-V
Working width
2.200 mm
Raw material
Knitted and woven fabrics
Condition
Finishing used machine
Technical Data | ||
|---|---|---|
REFERENCE MACHINE | MONTEX 8F-V | |
TYPE | Finishing - Single layer stenter machine | |
WORKING WIDTH | 2.200 mm | |
CHAMBERS GAS HEATED | 8 | |
MAXON BURNERS | 8 | |
WEFT STRAIGHTENER | Bianco, with 6 optical heads | |
ADDITIONAL INFO | Horizontal pin chain, Length of the input arms: about 5000 mm, Steamer under the entry arms, Cutting device and selvage suction device, Cooling system at the exit from the oven, Delivery fabric in plate and in tangential big roll, Double exhauster for the expulsion of exhausted fumes, Electrical cabinet. | |
Finishing Textile Machines
Textile finishing is a process that convert the woven or knitted fabrics into a usable material and more specifically to any process performed after dyeing the yarn or fabric to improve the look, performance or “hand feel” of the finished textile product or clothing. This not only provides a nice appearance, but it also protects the fabric from UV damage, stains, and other elements that would otherwise damage it.
Basically, textile finishing is a chemical and mechanical processes used on textiles after they have been made.
There are different types of finishing:
- Mechanical finishing: refers to machine finishes such as embossing, heat setting, sanforizing, sheering, various, luster imparting, surface finishes, and glaze finishes.
- Chemical finishing: may be applied to cotton fabrics to produce low flammability, crease resist and other special effects.
- Calendering: is the third important mechanical process, in which fabrics are sandwiched between two heated rollers and pressed together to generate smooth, polished or embossed effects. This is common in the production of sheets and pillowcases, but it’s also used in the production of shirts, pants, and other garments.
- Smoothing: refers to a process of smoothing out the fabric and ironing it flat.
- Shrinking: Mechanical shrinking is a process whereby the fabric is forced to shrink width and/or lengthwise, creates a fabric in which any residual tendency to shrink after subsequent laundering is minimal. This is very important in the production of jeans, since the fabric needs to be taut, but not too taut.
Related used machinery
1.800 mm Biella Shrunk Process NANOMIX
BIELLA SHRUNK PROCESS
FINISHING STEAMING
TEXTILE MACHINE
NANOMIX is a compact low consumption finishing machine produced by Biella Shrunk Process whose process principle is essentially based on steam, water and air which are mixed inside a newly designed vaporization tunnel. This finishing steaming second-hand machine assures an optimal fabric relaxing with high shrinkage results to grant an ideal dimensional stability. Besides with the "Hot & Humid" system, the treated fabric shows a moisture regain increase instead of the typical over-drying, which takes place in traditional finishing machinery.
Custom prototype for related products
Karl Mayer Filsize SF 1800
KARL MAYER
SIZING TEXTILE MACHINE
KARL MAYER offers innovative textile sizing machine for the processing of spun yarns as well as single-end and full-end sizing machinery and assembling units for filament yarns. This second-hand FILSIZE SF 1800 sizing machine allow high productions with a range up designed to 500 m/min and a working width of 1.800 mm.
Custom prototype for related products
TMT WR 1000 Queen 2.350 mm
TMT
SIZING TEXTILE MACHINE
TMT WR 1000 Queen was designed for the most delicate fibers such as wool or filaments, works with sectional beams and tested with direct winder, the beam-to-beam system can work bi-directionally. The exclusive new vertical sizing module uses tangential applicators and two leveling/impregnating cylinders, an infrared oven and drying cylinders. This second-hand WR 1000 Queen Sizing Machine allow high productions with a range up to 50 meters and a working width of 2.350 mm.
Custom prototype for related products
Sulzer P7200 S 330 Projectile Looms
SULZER
PROJECTILE WEAVING LOOMS
SULZER machines It is designed to handle the largest application range. It is simple to operate & maintain and capable to produce high quality, providing the highest added value of all products enables the Customer to attack new opportunities and quickly penetrate new markets. Wide interchangeability of mechanical & electrical parts reduces operational costs for customers. These second-hand P7200 model entire Stock machines allow high productions with a working width of 3.300 mm.
Custom prototype for related products
