Code EK000390
Triple Wire Fourdrinier Paper Machine
PM
PAPER MAKING LINES
This Triple Wire Paper Making Plant has been designed to manufacture kraft and testliner paper with a grammage from 90 gsm to 180 gsm.
This second-hand Paper Production Line allow high productions with a range up designed to 400 m/min and a trimmed paper width of 4.200 mm.
Manufacturer
PM
Year of construction
2019
Number of layers
3
Raw material
Paper
Paper width
4.200 mm
Condition
Second-hand machine
Technical Data | |||
|---|---|---|---|
REFERENCE MACHINE | 4200 TRIPLE WIRE FOURDRINIER | ||
ITEM | KRAFT AND TESTLINER PAPER | ||
RATION | 90 - 180 g/m2 | ||
GENERAL RATION | 130 g/m2 | ||
CAPACITY | 250T / 24hours (according to 130 g, 350 m/min, 22 hours) | ||
WIRE WIDTH | 4.750 mm | ||
PAPER WIDTH BEFORE REELING MACHINE | 4.260 mm | ||
TRIMMED WIDTH | 4.200 mm | ||
GAUGE | 5.300 mm | ||
WORKING SPEED | 350 m/min | ||
Paper Machines
A Paper Machine is used in the Pulp and Paper industry to create paper in large quantities at high speed.
Modern Paper Machines are based on the principles of the Fourdrinier Machine, which uses a moving woven mesh to create a continuous paper web by filtering out the fibres held in a paper stock and producing a continuously moving wet mat of fibre.
This is dried in the machine to produce a strong paper web.
Paper machines have at least six distinct operational sections:
Forming section: is a continuous rotating wire mesh which removes water from the paper.
Press section: where the wet fibre web passes between large rolls loaded under high pressure to squeeze out as much water as possible.
Drying section: where the pressed sheet passes in a serpentine manner, a series of steam heated drying cylinders. Drying removes the water content down to a level of about 6%, where it will remain at typical indoor atmospheric conditions.
Size Press section: where the semi-dried paper is applied with a thin layer of starch and/ or other chemicals to improve several paper properties.
Calender section: where the dried paper is smoothened under high loading and pressure and so it shrinks through the drying section and is held in tension between the press section and the calender.
Reel section: where paper coming out of the machine is wound onto individual spools for further processing.
Related used machinery
Double Wire Paper Machine Carcano
CARCANO
PAPER MAKING PLANT
This used double wire paper making plant machine produced by Carcano has been designed to manufacture brown paper for containerboard with a grammage from 115 gsm to 200 gsm. This Second-Hand paper machine allow high productions with a range up designed to 720 m/min and a trimmed paper width of 4.640 mm.
Custom prototype for related products
Curioni Sun Master 540
CURIONI
TWISTED HANDLES PAPER BAG MAKING MACHINE
The paper bag making machine Curioni Sun Master 540 has been designed to manufacture square bottom paper bags with handles, from the medium up to the biggest formats. These bags with block bottom may be produced in 1 or more layers of paper depending on machine's equipment and specifications. Some of these paper bag making machines are equipped to attach a handle on the bag, which may be: twisted handle or a flat handle. This used Curioni Sun Master 540 is equipped with an twisted handle making unit witch is in line with the paper bag making machine (International Patent) and allows a high productions with a range up to 154 pcs/min and a bag width of 540 mm.
Custom prototype for related products
Ashe 220-80 Sapphire S2
ASHE
PAPER DUPLEX SLITTER REWINDERS
The key benefit for users of ASHE duplex slitter rewinders is productivity. Due to turret shaft support the machine is able to offer very fast cycle times, from the time the machine stops when the set length has been reached, to the time it starts the next run. The machine makes a clean operation for flexible packaging and medical applications and the latest control technology makes the machine easy to use, with a minimal webpath length.
Custom prototype for related products
2700 LAEM Paper Slitter Machine
LAEM
PAPER ROLL SLITTER REWINDERS
The manufacturer of the 2.700 mm LAEM DV 301/1000 has developed a range of machines that are appreciated for the processing and slitting a wide range of materials, focusing especially on all types of flexible packaging which allows to process the most delicate, the most complicated, structured and innovative materials and satisfy customer’s needs. The great experience matured by LAEM has allowed to develop a technology that is a targeted solution esteemed and appreciated by the protagonists of this field.
Custom prototype for related products
