Code EK000423
TMT WR 1000 Queen 2.350 mm
TMT
SIZING TEXTILE MACHINE
TMT WR 1000 Queen was designed for the most delicate fibers such as wool or filaments, works with sectional beams and tested with direct winder, the beam-to-beam system can work bi-directionally. The exclusive new vertical sizing module uses tangential applicators and two leveling/impregnating cylinders, an infrared oven and drying cylinders. This second-hand WR 1000 Queen Sizing Machine allow high productions with a range up to 50 meters and a working width of 2.350 mm.
Manufacturer
TMT
Year of construction
2009
Model
WR 1000 QUEEN
Working width
2.350 mm
Raw material
Textile
Condition
Second-hand sizing machine
Technical Data | |||
|---|---|---|---|
REFERENCE MACHINE | WR 1000 QUEEN | ||
TYPE | TANGENTIAL SIZING | ||
WORKING WIDTH | 2.350 mm | ||
DISKS DIAMETER | 1.000 mm | ||
MAX BEAMS WIDTH | 3.100 mm | ||
SPEED | up to 50 mt | ||
DIMENSIONS | 13,56 x 4,84 mt | ||
Sizing Textile Machines
The sizing process consists of impregnating with the size the warp unwound from the warping beams, drying, separating the ends and beaming. During the sizing process, the warp is marked for dividing it into pieces of predetermined length.
The main parts of a sizing machine are:
The creel for the accommodation of the warping beams
The framework and drive
The sizing unit consisting of a size box and immersion and squeezing rollers
The drying section where the excess moisture is removed from the size and pressed warp ends
The headstock
Upon the arrangement of the drying section, all sizing machines may be classified as follows:
- Cylinder sizing machine in which the warp is dried by contact with the hot surface of the cylinder;
- Hot air sizing machine in which drying is effected in chambers with hot air;
- Combined sizing machine in which the warp is dried by contact with the hot surface of the cylinders and bypassing through hot air chambers;
- Special sizing machine in which the warp is dried by electric heating, high-frequency currents, or by infra-red rays.
Related used machinery
Karl Mayer Filsize SF 1800
KARL MAYER
SIZING TEXTILE MACHINE
KARL MAYER offers innovative textile sizing machine for the processing of spun yarns as well as single-end and full-end sizing machinery and assembling units for filament yarns. This second-hand FILSIZE SF 1800 sizing machine allow high productions with a range up designed to 500 m/min and a working width of 1.800 mm.
Custom prototype for related products
1.800 mm Biella Shrunk Process NANOMIX
BIELLA SHRUNK PROCESS
FINISHING STEAMING
TEXTILE MACHINE
NANOMIX is a compact low consumption finishing machine produced by Biella Shrunk Process whose process principle is essentially based on steam, water and air which are mixed inside a newly designed vaporization tunnel. This finishing steaming second-hand machine assures an optimal fabric relaxing with high shrinkage results to grant an ideal dimensional stability. Besides with the "Hot & Humid" system, the treated fabric shows a moisture regain increase instead of the typical over-drying, which takes place in traditional finishing machinery.
Custom prototype for related products
Benninger Ben-tronic 3000 Warper
BENNINGER
WARPING SECTIONAL TEXTILE MACHINE
This used Ben-tronic 3000 sectional warper allow high productions with a range up designed to 1.300 m/min and a working width of 3.000 mm. The customers operating in the high-fashion textile industry such as for the production of fabrics for suits, shirts and upholstery, appreciate the advantages of Benninger automatic sectional warping machinery.
Custom prototype for related products
Sulzer P7200 S 330 Projectile Looms
SULZER
PROJECTILE WEAVING LOOMS
SULZER machines It is designed to handle the largest application range. It is simple to operate & maintain and capable to produce high quality, providing the highest added value of all products enables the Customer to attack new opportunities and quickly penetrate new markets. Wide interchangeability of mechanical & electrical parts reduces operational costs for customers. These second-hand P7200 model entire Stock machines allow high productions with a working width of 3.300 mm.
Custom prototype for related products
